Skip to content

Circuits and other components

The page of a fusebox lists its components in the order they sit in the fusebox itself. Most of them are circuits. The rest are the devices in front of them.

  • A circuit is one breaker or fuse, and everything it powers. Give it its number and a description, such as “Kitchen sockets” or “Washing machine”.
  • An earth leakage switch (also called a residual current device, or RCD) guards a row of circuits. It switches them all off when current leaks away. Circuits sit behind the switch that guards them.
  • A main switch switches the whole fusebox off.
  • Other devices, such as an energy meter, a time switch or surge protection, can be added too, so the overview matches what you see.
  1. Open the fusebox and choose Add component.
  2. Pick what it is. Start with the earth leakage switch if your fusebox has one, then add the circuits behind it.
  3. Fill in the number and the description. The rating (such as 16 A), the number of phases and the curve are optional: fill them in when you can read them on the device.
  4. Save. With Add another after saving you go straight on to the next one.

Write what someone needs when the power is off: the room and what is plugged in there. “Sockets living room and hallway” helps more than “Group 3”.

Use Notes for anything extra, such as “Also powers the outside light”.

When a circuit is added, or an appliance moves to another circuit, change the overview. The QR code stays the same and shows the new version at once. Print a new overview for inside the door.